English section
English and other languages Board
-
- Registrovaný
- Příspěvky: 2
- Registrován: 25.leden 2013 - 7:56
Skylink: help
Příspěvek od giovanni71 »
I am not Czech but I have bought from czech seller a skylink card, the card is active, but i don't know how can renew the tv package i am interested, because i haven't an account. I have sent to seller a lot of mail to have an account to buy the package of my interest, but the seller doesn't replay. Probably the seller has registered the card for me but i haven't login and password data. I would want know if is it possible solve this my problem, i would be very grateful for your help. THanks.
Re: Skylink: help
If you want to subscribe some packages there is way to do it without login and password.You need appropriate person,mostly Skylink partner.
Na dotazy nepoužívejte SZ, ale fórum
- revis
- Moderátor
- Příspěvky: 2846
- Registrován: 05.únor 2007 - 16:38
- satelitni prijimac: vsetky
- Bydliště: okr.Prievidza
Re: Skylink: help
Basically AT ALL really need to know exactly activation data. Just select the page http://www.skylink.sk/zakladne-balicky some package, multiplying the unit price by the number of months and pay by bank transfer Skylink. For activation to wait about 3-4 days, but it works.
Skylink bank account: 25661323/7500
variable symbol (last 10 digits decoder card, on the back of the card below the bar code).
Skylink bank account: 25661323/7500
variable symbol (last 10 digits decoder card, on the back of the card below the bar code).
cislo karty..PNG
specific symbol shown in the last column price list
cennik.PNG
Nemáte oprávnění prohlížet přiložené soubory.
-
- Registrovaný
- Příspěvky: 2
- Registrován: 25.leden 2013 - 7:56
Re: Skylink: help
Příspěvek od giovanni71 »
Thanks, but for international money transfer i need Bank BIC/SWIFT of skylink, which is ? And do you think that is legal it? . Thanks again.
- kovsoft
- Mírně pokročilý
- Příspěvky: 34
- Registrován: 08.prosinec 2006 - 20:17
- satelitni prijimac: vučko,android tv...
- Bydliště: EU
- Kontaktovat uživatele:
Re: Skylink: help
hmm now accept paypall skylink .. this verry interest .. i must is check it.. but ..
ZABAVTE SA A NEBIZNISUJTE STALE
VU+ čko
Android
... a iné
*GBOX* HADU*OSCAM*
2 LOCAL CARDS IS MINIMUM
keby niečo tak na PM-"vsjo"
LENIN SA UČIL AJ JA SA STÁLE UČÍM
VU+ čko
Android
... a iné
*GBOX* HADU*OSCAM*
2 LOCAL CARDS IS MINIMUM
keby niečo tak na PM-"vsjo"
LENIN SA UČIL AJ JA SA STÁLE UČÍM
- EnoSat
- Legenda Fóra
- Příspěvky: 2739
- Registrován: 20.únor 2008 - 19:16
- satelitni prijimac: Dreambox - Dr.HD F16 - TBS5925
- Kontaktovat uživatele:
Re: Hello to all forum members
Hi
ROVER TAB900+ , Televes H30 FLEX
Gibertini OP100LN /85E-53W/
WaveFrontier T90 /51E-39E-36E-33E-28E-26E-23E-19E-16E-13E-9E-7E-5E-2E-1W-4W/
Edision MIO+ 4K, Octagon SF8008, Mutant HD51, QVIART Lunix, Ustym 4K S2 OTT, VU Solo4K, Dreambox 900UHD/7020HD/500HD, TBS-5925/5530/5220
Gibertini OP100LN /85E-53W/
WaveFrontier T90 /51E-39E-36E-33E-28E-26E-23E-19E-16E-13E-9E-7E-5E-2E-1W-4W/
Edision MIO+ 4K, Octagon SF8008, Mutant HD51, QVIART Lunix, Ustym 4K S2 OTT, VU Solo4K, Dreambox 900UHD/7020HD/500HD, TBS-5925/5530/5220
- vaanja
- Mírně pokročilý
- Příspěvky: 41
- Registrován: 21.květen 2008 - 16:38
- satelitni prijimac: VU+ Ultimo4k
Re: Raspberry PI model B (oscam?)
I have recently acquired a couple of Raspberry Pi to play with, and I must say I am quite impressed with this cheap little device.
You can use it as a desktop, a small server, a media center and you also have GPIO interface to control external hardware, like sensors and motor drivers (like the Arduino but with much more processing power and memory).
The first experiment I did when I got my hands on the Raspberry was to compile and install Oscam so I could have a server with little energy consumption but still has the processing power required to sustain a large number of Oscam users and readers.
This post is the report of my experiment and will allow you to reproduce my steps.
This tutorial is organized in 4 steps :
Step 1 – Prepare an SD-Card with a Raspbian official image and boot your Raspberry for the first time.
Step 2 – Install the packages required to compile Oscam for the Raspberry.
Step 3 – Get the source, compile and install Oscam on the Raspberry.
Step 4 – Final tweaks on your new Oscam server.
So, before we start, you are going to need to download a few tools and the Raspberry Image.
Below is the list of tools I used, there are others but these ones worked for me.
Tools Required
Win32DiskImager – https://launchpad.net/win32-image-writer
This tool will be used to load the Raspbian Image into the SD-Card.
Putty – http://www.chiark.greenend.org.uk/~sgta ... nload.html
This is an SSH and Telnet client which will be used to remotely access the Raspberry.
Filezilla FTP Client- http://filezilla-project.org/download.php?type=client
This is an FTP client that supports SFTP which will be used to send files to the Raspberry using the SFTP protocol.
Raspbian Image – http://www.raspberrypi.org/downloads
This is the Raspbian image which will be loaded into the SD Card (need a 2Gb card or higher).
Ok, now that you have downloaded the tools, let´s get started.
Step 1 - Prepare an SD-Card with a Raspbian official image and boot your Raspberry for the first time.
There are several images for the Raspberry. On this tutorial we are using the official Raspbian image. It comes with alot of stuff you will not use on a dedicated Oscam server, like the X server and the LXDE Enviroment but we will use this image and not remove anything because you might want to use your raspberry for other stuff while running Oscam at the same time.
Extract the Raspbian image you downloaded into a folder on the computer.
Insert your SD Card on the computer card reader or an external card reader.
Launch the Win32DiskImager and select the image you extracted (ex: 2012-09-18-wheezy-raspbian.img).
Select the drive letter of the SD Card you want to flash.
Click on “Write” and wait for the process to terminate.
There are many other ways to flash the image on the SD Card as you can see here.
Now that the image is flashed, it is time to insert the card into the Raspberry and connect the power, display and network cable.
Remember that the default login for this image is :
Username : pi
Password : raspberry
At the raspberry first boot you will see a configuration menu which will allow you to setup your system (this is the raspi-config tool which you can call at any time by using the “sudo raspi-config” command).
The only changes I made on this menu was the “expand_rootfs” option because I have an 8Gb SD-Card and wanted to use the full space (by default it uses just 2Gb) and I changed my password and the timezone to correct the date/time for my country and zone.
After setting your changes I advise you to restart your raspberry.
Now that you have installed your image on the Raspberry it is time to prepare the system for Oscam.
You will obviously need to type some commands to install the packages, you can do this by using a keyboard connected on one of the USB ports or you can do it remotely using SSH and I recommend the SSH method because you will be able to copy & paste commands which is very useful. In order to remotely access the Raspberry SSH server, it should be connected to the network and you need to know which IP address it has acquired from the DHCP server.
After booting the raspberry there will be a message on the console which says something like “My IP address is xxx.xxx.xxx.xxx”.
After logging into the raspberry you can also type “ifconfig” and you will see the network configuration for the eth0 device. The second line should be something like “inet addr: xxx.xxx.xxx.xxx”. That is the raspberry IP address.
Now that you know which IP address is being used by your raspberry :
Launch putty.exe.
Type the IP address of the raspberry in the Hostname field.
Click on “Open“.
Accept the certificate and login with the “pi/raspberry” account.
The first step of this tutorial is done.
You have successfully loaded an image into your raspberry and now have remote access to the system.
Step 2 - Install the packages required to compile Oscam for the Raspberry.
Now that you are logged into the system, you will install all the packages required to compile Oscam.
You can paste the following commands into Putty by clicking the right mouse button.
First, you will update the package repositories of the APT system.
sudo apt-get update
The sudo command is used when you need to do something that requires permissions of a superuser. We use it because the “pi” account is not a superuser and system level operations like installing packages need a superuser account.
Now, let´s install the packages for compiling Oscam.
sudo apt-get install subversion cmake build-essential libssl-dev libpcsclite1 libpcsclite-dev dialog
If you are using USB smartcard readers, you will need to compile libusb.
Go to your home directory.
cd ~
Download libusb sources from sourceforge.
wget http://sourceforge.net/projects/libusb/ ... .9.tar.bz2
Extract the sources.
tar xjvf libusb-1.0.9.tar.bz2
Compile libusb and install.
cd libusb-1.0.9
./configure
make
sudo make install
Back to home directory.
cd ~
All packages required for compiling Oscam have been installed.
Step 3 - Get the source, compile and install Oscam on the Raspberry.
Now that you have all the required tools to compile Oscam, let´s get the source from the SVN repository.
svn checkout http://www.streamboard.tv/svn/oscam/trunk oscam-svn
Get inside the sources folder.
cd oscam-svn
Make the folder where the compiled binaries will be created.
mkdir build
Get inside the folder.
cd build
Prepare the build using cmake.
cmake ..
Compile Oscam
make
Install Oscam
sudo make install
If everything went smooth without any errors, you should now have Oscam installed on your system.
The oscam binary should now be located at /usr/local/bin.
By default oscam will attempt to read the configuration files located at /usr/local/etc so we have to copy the files into it.
Let´s change the ownership of the configuration folder so you are able to upload files using the SFTP client using the pi account.
sudo chown pi.pi /usr/local/etc –R
Launch Filezilla FTP Client
Open the Site Manager and create a new site.
Select protocol “SFTP – SSH File Transfer Protocol”.
Select Logon Type “Normal”.
Type your raspberry username and password and click “OK”.
Navigate to /usr/local/etc folder and upload your oscam configuration files.
Note : If you don´t have any configuration files already created, check /home/pi/oscam-svn/Distribution/doc/example.
To test you new Oscam server, type
sudo oscam
Congratulations, you have successfully compiled and installed Oscam on your Raspberry.
If you want to learn how to setup oscam to start on boot and set a fixed IP address, check the next step.
Step 4 - Final tweaks on your new Oscam server.
On this step you will be able to set oscam like a daemon which will be started when the system boots and set a fixed IP address.
Setting up a fixed IP address.
This is quite simple. You just need to edit a file and restart the interface.
Edit the network configuration file.
sudo nano /etc/network/interfaces
Find the line that reads “iface eth0 inet dhcp” and replace with the following lines.
iface eth0 inet static
address 192.168.1.130
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
Replace the IP address to reflect your own network settings.
Now restart the network service.
sudo /etc/init.d/networking restart
If you are using SSH to edit the settings, you will be disconnected because you restarted the network.
You can now connect to the Raspberry using the new IP address.
Start Oscam with system boot.
To start Oscam automatically when your system boots is quite useful because if you have a power failure you make sure that Oscam will start when the power comes back and your system reboots.
To do this, we just need to copy a script to the /etc/init.d/ folder and set it´s runlevel.
Copy the following script and save it on your computer with the name “oscam”.
#! /bin/sh
### BEGIN INIT INFO
# Provides: Oscam
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Oscam init script
# Description: Launch oscam at startup
### END INIT INFO
DAEMON=/usr/local/bin/oscam
DEAMON_OPTS="-b -r 2"
PIDFILE=/var/run/oscam.pid
test -x ${DAEMON} || exit 0
. /lib/lsb/init-functions
case "$1" in
start)
log_daemon_msg "Starting OScam"
start-stop-daemon --start --quiet --background --pidfile ${PIDFILE} --make-pidfile --exec ${DAEMON} -- ${DAEMON_OPTS}
log_end_msg $?
;;
stop)
log_daemon_msg "Stopping OScam"
start-stop-daemon --stop --exec ${DAEMON}
log_end_msg $?
;;
force-reload|restart)
$0 stop
$0 start
;;
*)
echo "Usage: /etc/init.d/oscam {start|stop|restart|force-reload}"
exit 1
;;
esac
exit 0
On putty type the commands :
sudo touch /etc/init.d/oscam
sudo chown pi.pi /etc/init.d/oscam
Open Filezilla and upload “oscam” file to “/etc/init.d”.
Type the command
sudo chmod 755 /etc/init.d/oscam
Now that you have the script and have setup the correct execute permissions, type :
sudo update-rc.d oscam defaults
Oscam is now setup to run at system boot.
If you come into any problems or find mistakes or have any suggestion to improve this tutorial, please leave a comment below.
Thank you for your time.
source: tekreaders.com
You can use it as a desktop, a small server, a media center and you also have GPIO interface to control external hardware, like sensors and motor drivers (like the Arduino but with much more processing power and memory).
The first experiment I did when I got my hands on the Raspberry was to compile and install Oscam so I could have a server with little energy consumption but still has the processing power required to sustain a large number of Oscam users and readers.
This post is the report of my experiment and will allow you to reproduce my steps.
This tutorial is organized in 4 steps :
Step 1 – Prepare an SD-Card with a Raspbian official image and boot your Raspberry for the first time.
Step 2 – Install the packages required to compile Oscam for the Raspberry.
Step 3 – Get the source, compile and install Oscam on the Raspberry.
Step 4 – Final tweaks on your new Oscam server.
So, before we start, you are going to need to download a few tools and the Raspberry Image.
Below is the list of tools I used, there are others but these ones worked for me.
Tools Required
Win32DiskImager – https://launchpad.net/win32-image-writer
This tool will be used to load the Raspbian Image into the SD-Card.
Putty – http://www.chiark.greenend.org.uk/~sgta ... nload.html
This is an SSH and Telnet client which will be used to remotely access the Raspberry.
Filezilla FTP Client- http://filezilla-project.org/download.php?type=client
This is an FTP client that supports SFTP which will be used to send files to the Raspberry using the SFTP protocol.
Raspbian Image – http://www.raspberrypi.org/downloads
This is the Raspbian image which will be loaded into the SD Card (need a 2Gb card or higher).
Ok, now that you have downloaded the tools, let´s get started.
Step 1 - Prepare an SD-Card with a Raspbian official image and boot your Raspberry for the first time.
There are several images for the Raspberry. On this tutorial we are using the official Raspbian image. It comes with alot of stuff you will not use on a dedicated Oscam server, like the X server and the LXDE Enviroment but we will use this image and not remove anything because you might want to use your raspberry for other stuff while running Oscam at the same time.
Extract the Raspbian image you downloaded into a folder on the computer.
Insert your SD Card on the computer card reader or an external card reader.
Launch the Win32DiskImager and select the image you extracted (ex: 2012-09-18-wheezy-raspbian.img).
Select the drive letter of the SD Card you want to flash.
Click on “Write” and wait for the process to terminate.
There are many other ways to flash the image on the SD Card as you can see here.
Now that the image is flashed, it is time to insert the card into the Raspberry and connect the power, display and network cable.
Remember that the default login for this image is :
Username : pi
Password : raspberry
At the raspberry first boot you will see a configuration menu which will allow you to setup your system (this is the raspi-config tool which you can call at any time by using the “sudo raspi-config” command).
The only changes I made on this menu was the “expand_rootfs” option because I have an 8Gb SD-Card and wanted to use the full space (by default it uses just 2Gb) and I changed my password and the timezone to correct the date/time for my country and zone.
After setting your changes I advise you to restart your raspberry.
Now that you have installed your image on the Raspberry it is time to prepare the system for Oscam.
You will obviously need to type some commands to install the packages, you can do this by using a keyboard connected on one of the USB ports or you can do it remotely using SSH and I recommend the SSH method because you will be able to copy & paste commands which is very useful. In order to remotely access the Raspberry SSH server, it should be connected to the network and you need to know which IP address it has acquired from the DHCP server.
After booting the raspberry there will be a message on the console which says something like “My IP address is xxx.xxx.xxx.xxx”.
After logging into the raspberry you can also type “ifconfig” and you will see the network configuration for the eth0 device. The second line should be something like “inet addr: xxx.xxx.xxx.xxx”. That is the raspberry IP address.
Now that you know which IP address is being used by your raspberry :
Launch putty.exe.
Type the IP address of the raspberry in the Hostname field.
Click on “Open“.
Accept the certificate and login with the “pi/raspberry” account.
The first step of this tutorial is done.
You have successfully loaded an image into your raspberry and now have remote access to the system.
Step 2 - Install the packages required to compile Oscam for the Raspberry.
Now that you are logged into the system, you will install all the packages required to compile Oscam.
You can paste the following commands into Putty by clicking the right mouse button.
First, you will update the package repositories of the APT system.
sudo apt-get update
The sudo command is used when you need to do something that requires permissions of a superuser. We use it because the “pi” account is not a superuser and system level operations like installing packages need a superuser account.
Now, let´s install the packages for compiling Oscam.
sudo apt-get install subversion cmake build-essential libssl-dev libpcsclite1 libpcsclite-dev dialog
If you are using USB smartcard readers, you will need to compile libusb.
Go to your home directory.
cd ~
Download libusb sources from sourceforge.
wget http://sourceforge.net/projects/libusb/ ... .9.tar.bz2
Extract the sources.
tar xjvf libusb-1.0.9.tar.bz2
Compile libusb and install.
cd libusb-1.0.9
./configure
make
sudo make install
Back to home directory.
cd ~
All packages required for compiling Oscam have been installed.
Step 3 - Get the source, compile and install Oscam on the Raspberry.
Now that you have all the required tools to compile Oscam, let´s get the source from the SVN repository.
svn checkout http://www.streamboard.tv/svn/oscam/trunk oscam-svn
Get inside the sources folder.
cd oscam-svn
Make the folder where the compiled binaries will be created.
mkdir build
Get inside the folder.
cd build
Prepare the build using cmake.
cmake ..
Compile Oscam
make
Install Oscam
sudo make install
If everything went smooth without any errors, you should now have Oscam installed on your system.
The oscam binary should now be located at /usr/local/bin.
By default oscam will attempt to read the configuration files located at /usr/local/etc so we have to copy the files into it.
Let´s change the ownership of the configuration folder so you are able to upload files using the SFTP client using the pi account.
sudo chown pi.pi /usr/local/etc –R
Launch Filezilla FTP Client
Open the Site Manager and create a new site.
Select protocol “SFTP – SSH File Transfer Protocol”.
Select Logon Type “Normal”.
Type your raspberry username and password and click “OK”.
Navigate to /usr/local/etc folder and upload your oscam configuration files.
Note : If you don´t have any configuration files already created, check /home/pi/oscam-svn/Distribution/doc/example.
To test you new Oscam server, type
sudo oscam
Congratulations, you have successfully compiled and installed Oscam on your Raspberry.
If you want to learn how to setup oscam to start on boot and set a fixed IP address, check the next step.
Step 4 - Final tweaks on your new Oscam server.
On this step you will be able to set oscam like a daemon which will be started when the system boots and set a fixed IP address.
Setting up a fixed IP address.
This is quite simple. You just need to edit a file and restart the interface.
Edit the network configuration file.
sudo nano /etc/network/interfaces
Find the line that reads “iface eth0 inet dhcp” and replace with the following lines.
iface eth0 inet static
address 192.168.1.130
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
Replace the IP address to reflect your own network settings.
Now restart the network service.
sudo /etc/init.d/networking restart
If you are using SSH to edit the settings, you will be disconnected because you restarted the network.
You can now connect to the Raspberry using the new IP address.
Start Oscam with system boot.
To start Oscam automatically when your system boots is quite useful because if you have a power failure you make sure that Oscam will start when the power comes back and your system reboots.
To do this, we just need to copy a script to the /etc/init.d/ folder and set it´s runlevel.
Copy the following script and save it on your computer with the name “oscam”.
#! /bin/sh
### BEGIN INIT INFO
# Provides: Oscam
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Oscam init script
# Description: Launch oscam at startup
### END INIT INFO
DAEMON=/usr/local/bin/oscam
DEAMON_OPTS="-b -r 2"
PIDFILE=/var/run/oscam.pid
test -x ${DAEMON} || exit 0
. /lib/lsb/init-functions
case "$1" in
start)
log_daemon_msg "Starting OScam"
start-stop-daemon --start --quiet --background --pidfile ${PIDFILE} --make-pidfile --exec ${DAEMON} -- ${DAEMON_OPTS}
log_end_msg $?
;;
stop)
log_daemon_msg "Stopping OScam"
start-stop-daemon --stop --exec ${DAEMON}
log_end_msg $?
;;
force-reload|restart)
$0 stop
$0 start
;;
*)
echo "Usage: /etc/init.d/oscam {start|stop|restart|force-reload}"
exit 1
;;
esac
exit 0
On putty type the commands :
sudo touch /etc/init.d/oscam
sudo chown pi.pi /etc/init.d/oscam
Open Filezilla and upload “oscam” file to “/etc/init.d”.
Type the command
sudo chmod 755 /etc/init.d/oscam
Now that you have the script and have setup the correct execute permissions, type :
sudo update-rc.d oscam defaults
Oscam is now setup to run at system boot.
If you come into any problems or find mistakes or have any suggestion to improve this tutorial, please leave a comment below.
Thank you for your time.
source: tekreaders.com
Vu+ Ultimo4k VTI 15.0.0, Vu+ Solo2 VTI 15.0.0, XPEED LX3 OpenATV 6.4, Vu+ Zero4k OpenATV 6.4
-
- Registrovaný
- Příspěvky: 7
- Registrován: 31.červenec 2021 - 21:18
- satelitni prijimac: Octagon SF8008 Twin / OpenATV
- Bydliště: Becej / Vojvodina / Serbia
Re: SUBSsupport
Hi!
I have successfully installed the "subssuport FTP 3.3.0 py3.rar" on OpenATV 7.0 ( python 3.9 ).
The app opens, and I can browse all the menues, but when I press download, nothing happens ... the download does not start.
Could You advise please ?
Thanx!
I have successfully installed the "subssuport FTP 3.3.0 py3.rar" on OpenATV 7.0 ( python 3.9 ).
The app opens, and I can browse all the menues, but when I press download, nothing happens ... the download does not start.
Could You advise please ?
Thanx!
-
- Pokročilý
- Příspěvky: 298
- Registrován: 08.říjen 2019 - 21:51
- satelitni prijimac: Dreamplex 8000
Re: Hello to all forum members
You should use some diffrent version, offcourse not in py3 image. Atv7 is not officialy released (use 6.4) and original author did not release any version for py3. Or you can ask user which upload that version but i think he can't help you, because he is not the author .
Dreamplex 8000
-
- Registrovaný
- Příspěvky: 7
- Registrován: 31.červenec 2021 - 21:18
- satelitni prijimac: Octagon SF8008 Twin / OpenATV
- Bydliště: Becej / Vojvodina / Serbia
Re: Hello to all forum members
I was replying to another post :
viewtopic.php?p=824795#p824795
but the admin moved my post here ... that is why my question makes no sense
viewtopic.php?p=824795#p824795
but the admin moved my post here ... that is why my question makes no sense
- EnoSat
- Legenda Fóra
- Příspěvky: 2739
- Registrován: 20.únor 2008 - 19:16
- satelitni prijimac: Dreambox - Dr.HD F16 - TBS5925
- Kontaktovat uživatele:
Re: Hello to all forum members
It is written in English in the International thread, if you want to write in the SubSuport thread, write in Slovak or Czech (or use a translator like the others).
ROVER TAB900+ , Televes H30 FLEX
Gibertini OP100LN /85E-53W/
WaveFrontier T90 /51E-39E-36E-33E-28E-26E-23E-19E-16E-13E-9E-7E-5E-2E-1W-4W/
Edision MIO+ 4K, Octagon SF8008, Mutant HD51, QVIART Lunix, Ustym 4K S2 OTT, VU Solo4K, Dreambox 900UHD/7020HD/500HD, TBS-5925/5530/5220
Gibertini OP100LN /85E-53W/
WaveFrontier T90 /51E-39E-36E-33E-28E-26E-23E-19E-16E-13E-9E-7E-5E-2E-1W-4W/
Edision MIO+ 4K, Octagon SF8008, Mutant HD51, QVIART Lunix, Ustym 4K S2 OTT, VU Solo4K, Dreambox 900UHD/7020HD/500HD, TBS-5925/5530/5220
Přejít na
- VOLNÁ DISKUSE
- ↳ Volná diskuse
- ↳ Poradna pri nákupe ... ??? ... >>> ... :-)
- ↳ Satelitné / terestriálne / IPTV / a iné ... platformy
- ↳ Skylink, Antena+
- ↳ FreeSat
- ↳ Digi TV
- ↳ Telly
- ↳ Magio Sat, Magio IPTV, Magio Go
- ↳ Antik Sat, Antik IPTV
- ↳ Orange TV
- ↳ Pantelio (Obecné siete)
- ↳ Plustelka
- ↳ DVB-T, DVB-T2, DVB-C, DVB-C2
- ↳ DVB-T prijímače
- ↳ DVB-C prijímače
- ↳ DVB-T regióny
- ↳ DVB-C regióny
- ↳ DVB-T/C antény a meracia technika
- ↳ DVB-T2, HEVC 265, 4K
- ↳ Všeobecný F.A.Q.
- ↳ Návody na inštaláciu sat reciverov a príslušenstva
- ↳ Zoznam a poloha satelitov na orbite
- ↳ Satelitná encyklopédia
- ↳ Užitečné odkazy
- Satelitné příjímače so systémom Linux
- ↳ Octagon
- ↳ Octagon HD SF 918, SF 1008, ...
- ↳ DOWNLOAD - Octagon HD SF- 918
- ↳ OCTAGON SF3038
- ↳ DOWNLOAD - OCTAGON SF3038
- ↳ Octagon SF4008 4K UHD Triple
- ↳ DOWNLOAD - Octagon SF4008 4K
- ↳ Návody, postupy - Octagon SF4008 4K
- ↳ Octagon SFX6008/6018
- ↳ DOWNLOAD - Octagon SFX6008/6018
- ↳ Octagon SF8008 4K UHD
- ↳ DOWNLOAD - Octagon SF8008 4K UHD
- ↳ OCTAGON SF108
- ↳ DOWNLOAD - OCTAGON SF108
- ↳ OCTAGON SF208
- ↳ DOWNLOAD - OCTAGON SF208
- ↳ OCTAGONS SX Family
- ↳ DOWNLOAD - OCTAGONS SX Family
- ↳ Dreambox prijimace
- ↳ Diskuse - Dreambox
- ↳ Dreambox Seven Ultra HD
- ↳ DM-9XX UHD
- ↳ DM-ONE UHD
- ↳ DM-8000 HD
- ↳ DM-820 HD
- ↳ DM-800 HD
- ↳ DM-800 HD SE
- ↳ DM-7080 HD
- ↳ DM-7020 HD
- ↳ DM-52X HD
- ↳ DM-500 HD
- ↳ DM-DVB-S
- ↳ DM-7025S
- ↳ DM-7020S
- ↳ DM-7000S
- ↳ DM-600 PVR
- ↳ DM-56x0
- ↳ DM-500S
- ↳ DOWNLOAD - Dreambox
- ↳ DM-9XX UHD
- ↳ DM-ONE UHD
- ↳ DM-TWO UHD
- ↳ DM-8000 HD
- ↳ DM-820 HD
- ↳ DM-800 HD
- ↳ DM-800 HD SE
- ↳ DM-7080 HD
- ↳ DM-7020 HD
- ↳ DM-52X HD
- ↳ DM-500 HD
- ↳ DM-DVB-S
- ↳ DM-7025S
- ↳ DM-7020S
- ↳ DM-7000S
- ↳ DM-56x0
- ↳ DM-600 PVR
- ↳ DM-500S
- ↳ Plugins
- ↳ Tools
- ↳ VU+ DUO, SOLO, UNO, ULTIMO, ZERO, SOLO 4K, Uno 4K, Duo 4K, Ultimo 4K
- ↳ VU+ SOLO 4K
- ↳ Diskusia VU+ SOLO 4K
- ↳ Download image VU+ SOLO 4K
- ↳ Download plugins VU+ SOLO 4K
- ↳ VU+ Uno 4K
- ↳ Diskusia VU+ Uno 4K
- ↳ Download image VU+ Uno 4K
- ↳ Download plugins VU+ Uno 4K
- ↳ VU+ Uno 4K SE
- ↳ Diskusia VU+ Uno 4K SE
- ↳ Download image VU+ Uno 4K SE
- ↳ Download plugins VU+ Uno 4K SE
- ↳ VU+ Duo 4K
- ↳ Diskusia VU+ Duo 4K
- ↳ Download VU+ Duo 4K
- ↳ VU+ Ultimo 4K
- ↳ Diskusia VU+ Ultimo 4K
- ↳ Download image VU+ Ultimo 4K
- ↳ Download plugins VU+ Ultimo 4K
- ↳ Download VU+ DUO2
- ↳ Download VU+ DUO
- ↳ Download VU+ SOLO
- ↳ Download VU+ SOLO 2
- ↳ Download VU SOLO SE
- ↳ Download VU+ UNO
- ↳ Download VU+ ULTIMO
- ↳ Download VU+ ZERO
- ↳ Download VU+ ZERO 4K
- ↳ Download plugins
- ↳ Download tools
- ↳ Formuler
- ↳ Zgemma
- ↳ PULSe 4K
- ↳ uClan
- Satelitní příjímače Globo / Opticum / Optibox / Amiko
- ↳ Přijímače Globo / Opticum / OptiboX / Amiko
- ↳ DOWNLOAD - Globo / Opticum / OptiboX / Amiko
- Satelitné prijímače so systémom ANDROID
- ↳ AB IPBox ONE, TWO, TWO Combo
- ↳ GTMEDIA
- Satelitní příjímače
- ↳ AB Cryptobox 4XX,5XX,6XX,7XX,8XX
- ↳ AB Cryptobox 800UHD, ...
- ↳ AB Cryptobox 700HD, 750HD, 752HD Combo DVB-T2/S2/C
- ↳ Download ABCRBOX 700 HD
- ↳ Download ABCRBOX 750 HD
- ↳ Download ABCRBOX 752 HD Combo
- ↳ Download ABCRBOX 700 HD mini
- ↳ Návody , postupy 7xx HD , 752 HD Combo
- ↳ Pomôcky a pluginy 7xx HD , 752 HD Combo
- ↳ AB Cryptobox 600HD , 600HD mini, 650 HD, 650 HDC, 652 HD Combo
- ↳ Download ABCRBOX 652 (Combo)
- ↳ Download ABCRBOX 650 HDC (Cabel)
- ↳ Download ABCRBOX 650 HD
- ↳ Download ABCRBOX 600 HD
- ↳ Download ABCRBOX 600 HD mini
- ↳ Návody , postupy 600 HD, 650 HD , 650 HDC, 600HDmini, 652 HD Combo
- ↳ Pomôcky a pluginy 600 HD , 650 HD ,650 HDC, 600HD mini, 652 HD Combo
- ↳ Diskusia - AB Cryptobox
- ↳ Ferguson Ariva 102,202,100,200,4K
- ↳ Diskuse- Ariva 102, 202
- ↳ Diskuse - Ferguson Ariva 200
- ↳ Diskuse - Ariva @Link 200
- ↳ Diskuse - Ariva 4K
- ↳ Download - Ariva 100,200
- ↳ Download -Ariva combo 120,200,210,220,250
- ↳ Download -Ariva 102E,202E,102mini,52E
- ↳ Download - Ariva @Link 200
- ↳ Download - Ariva 4K
- ↳ Dreamsky
- ↳ DOWNLOAD - Dreamsky
- Satelitní přijímače - nezařazené
- ↳ Satelitní přijímače - nezařazené
- ↳ Klony - nelinuxove prijimače
- ↳ Klony - linuxové prijímače
- ↳ GoSAT
- Hardware ostatný /LNB, CI moduly, Motory, Switch-e .../
- ↳ LNB konvertory
- ↳ CI moduly
- ↳ T-REX / DRAGON / DIABLO CAM
- ↳ DOWNLOAD - T- REX / DRAGON / DIABLO CAM
- ↳ Motory
- ↳ Switch-e / prepínače
- ↳ Meracie zariadenia
- Softcams / Camds / Emulators / Keys
- ↳ CCCam
- ↳ Softcams / Camds - ostatné
- ↳ DOWNLOAD - Keys, Emulators
- Doplnky/nastavenia/pomôcky univerzálne
- ↳ Picons
- ↳ Enigma
- ↳ Bílé
- ↳ Černé
- ↳ Transparentní
- ↳ Oscam
- ↳ Bílé
- ↳ Černé
- ↳ Transparentní
- ↳ Neutrino
- ↳ Bílé
- ↳ Černé
- ↳ Transparentní
- ↳ Spark
- ↳ Bílé
- ↳ Černé
- ↳ Transparentní
- ↳ Ostatné
- ↳ Enigma2 Settings
- ↳ Plugins
- ↳ Skins
- ↳ Editors / tools
- International Board
- ↳ International Board
- ↳ AB DSR xxx / DMSIS
- ↳ AB IP BOX / DREAMBOX
- ↳ Globo
- ↳ Openbox
- ↳ AB Cryptobox
- Fotovoltaika
- ↳ Fotovoltaika (pro domácnosti, firmy a svépomocí)
- Smart home - chytré ovládání domácnosti
- ↳ Home Assistant
- ↳ Tuya Smart - Smart Life
- Kamerové systémy a zabezpečení domu
- ↳ Vše kolem kamerových systemů
- ↳ Vše kolem zabezpečovacích systémů
- Ostatní - provoz fóra
- ↳ Názory, informace a připomínky k tomuto fóru
- ↳ Mimo mísu
- ↳ Inzerce
- ↳ Darujem -vymením
- Archív
- ↳ SATELITNÉ PŘÍJÍMAČE SO SYSTÉMOM LINUX
- ↳ AB IPBox PRISMCUBE RUBY
- ↳ AB IPBox PRISMCUBE RUBY - download
- ↳ Firmware download
- ↳ Plugins download
- ↳ Návody , postupy .....
- ↳ Tools download
- ↳ ABcom HD prijimace - IPBox9900, IPBox99, IPBox55
- ↳ Návody a rýchla pomoc
- ↳ Download 9900 HD
- ↳ Download 99 HD
- ↳ Download 55 HD
- ↳ Download -pluginy, návody ....
- ↳ DGS HD prijimace - IPBox9000, IPBox900, IPBox910, IPBox91
- ↳ Download 9000HD
- ↳ image Enigma2
- ↳ image DGS
- ↳ image Neutrino
- ↳ Download 900HD
- ↳ image Enigma2
- ↳ image DGS
- ↳ image Neutrino
- ↳ Download 910HD
- ↳ image Enigma2
- ↳ image DGS
- ↳ image Neutrino
- ↳ Download IPbox 91HD
- ↳ image Enigma2
- ↳ image DGS
- ↳ image Neutrino
- ↳ Download HD spolecne
- ↳ Download - Plugins
- ↳ X-Trend ET 10000, 9xxx,8000,8500,6500,4000
- ↳ X-Trend ET4000
- ↳ ET4000 - postupy, návody
- ↳ ET4000 - download plugins
- ↳ ET4000 - images E2
- ↳ X-Trend ET 6500
- ↳ ET6500 - postupy, navody
- ↳ ET6500- download plugins
- ↳ ET6500 - images E2
- ↳ X.Trend ET 7x00
- ↳ X-trend ET8000 , ET10000
- ↳ ET8000 - postupy, návody
- ↳ ET8000 - download plugins
- ↳ ET8000 - images E2
- ↳ ET10000 - images E2
- ↳ X-Trend ET 8500
- ↳ ET8500 - postupy, navody
- ↳ ET8500- download plugins
- ↳ ET8500 - images E2
- ↳ X-Trend ET 9x00
- ↳ ET9x00 - postupy, návody
- ↳ ET9x00 - download plugins
- ↳ ET9x00 - images E2
- ↳ X-Trend : download spoločné
- ↳ HD-BOX Enibox
- ↳ Download HD-BOX Enibox
- ↳ Download image -Enibox
- ↳ Download - Navody , postupy
- ↳ Download emu, plugins
- ↳ Download - PC nástroje na správu prijimača
- ↳ Download settimgs
- ↳ F O R T I S prijímače: HDbox 7119,9105+,Dreamsky HD6
- ↳ Dreamsky HD6
- ↳ Diskusia Dreamsky HD6
- ↳ Download Dreamsky HD6
- ↳ HD-BOX Enigma2 v internal flash
- ↳ Download
- ↳ enigma2 7819 -HDBOX9105 plus
- ↳ enigma2 7919 HDBOX 7119
- ↳ enigma2 7119
- ↳ enigma2 8200
- ↳ HD-BOX Neutrino - internal flash
- ↳ Download - HDBOX Neutrino
- ↳ Download - HD-BOX
- ↳ Návody - HD-BOX pre IRD sw
- ↳ Návody - HD-BOX pre enigma2 USB verzia
- ↳ Zmena bootloadera a jtag pre Fortis prijímače.
- ↳ SHOWBOX -Vitamin - enigma2
- ↳ Download - enigma2 image
- ↳ Download -plugins
- ↳ Návody , postupy
- ↳ Downloads - utils
- ↳ Downloads -settings
- ↳ IQON Force
- ↳ Download IQON Force -1
- ↳ Download IQON Force 2+ combo
- ↳ Edision
- ↳ Download Edision
- ↳ QVIART
- ↳ Download Qviart LUNIX
- ↳ Download Qviart LUNIX CO
- ↳ Download Qviart LUNIX 4K
- ↳ Download Qviart LUNIX3 4K
- ↳ SATELITNÍ PŘÍJÍMAČE GLOBO / OPTICUM / OPTIBOX / AMIKO
- ↳ SATELITNÉ PRIJÍMAČE SO SYSTÉMOM ANDROID
- ↳ HDBOX -XBMC
- ↳ Download HDBOX -XBMC
- ↳ WeTek Play
- ↳ WeTek - enigma2
- ↳ WeTek - Android
- ↳ SATELITNÍ PŘÍJÍMAČE
- ↳ AB CRYPTOBOX 4XX,5XX,6XX,7XX,8XX
- ↳ AB Cryptobox 450,400,400 mini,200
- ↳ Diskuse -AB Cryptobox 450HD, 400HD, 400HD mini
- ↳ Diskuse - AB Cryptobox 200 SD
- ↳ Download - spoločné - návody, postupy, pomocný sw ...
- ↳ Download - AB Cryptobox 450HD
- ↳ Download - AB Cryptobox 400HD , 400HD mini
- ↳ Download - AB Cryptobox 200SD
- ↳ AB Cryptobox 500, 550, 500 Mini ,550C
- ↳ Diskuse - AB Cryptobox 500HD , 550HD , 500HD Mini
- ↳ Download - AB Cryptobox 550HD
- ↳ Download - AB Cryptobox 500HD
- ↳ Download -AB Cryptobox 500HD Mini
- ↳ Download AB Cryptobox 550 HD C
- ↳ Download - spoločné , návody, nástroje
- ↳ AZBOX
- ↳ DOWNLOAD - AZBOX
- ↳ Golden Interstar
- ↳ DOWNLOAD - Golden Interstar
- ↳ Satelitní přijímače - Neutrino HD
- ↳ Coolstream Link , Trinity DUO
- ↳ Základné informácie o prijímači Coolstream Link
- ↳ Diskusia Link
- ↳ Download image Link
- ↳ Coolstream Tank
- ↳ Základné informácie o prijímači Coolstream Tank
- ↳ Diskusia Tank
- ↳ Download image Tank
- ↳ Coolstream Trinity
- ↳ Základné informácie o prijímači Coolstream Trinity
- ↳ Diskusia Trinity
- ↳ Download image Trinity
- ↳ Coolstream ZEE 2 , Trinity V2 (nie DUO !!!)
- ↳ Základné informácie o prijímači Coolstream ZEE 2
- ↳ Diskusia ZEE 2
- ↳ Download ZEE 2
- ↳ Diskusia Neutrino HD1 , HD2
- ↳ Download - spoločné Tank, Trinity ZEE 2, Link
- ↳ Rady a návody
- ↳ Emulátory a Softcamy -Tank, Trinity , ZEE 2
- ↳ Download subory - ostatné
- ↳ Download - pluginy
- ↳ Mutant HD51
- ↳ Diskusia Mutant HD51
- ↳ Download Mutant HD51
- ↳ VU+ Solo 4K
- ↳ Diskusia VU+ Solo 4K
- ↳ Download VU+ Solo 4K
- ↳ Air Digital Zgemma H7C/S
- ↳ Diskusia Air Digital Zgemma H7C/S
- ↳ Download Air Digital Zgemma H7C/S
- ↳ Satelitní příjímače Ineos
- ↳ Přijímače Ineos
- ↳ Download Ineos
- ↳ Satelitní příjímače OPENBOX & SHOWBOX
- ↳ Openbox SX6 HD
- ↳ Download Openbox SX6
- ↳ Openbox SX9 HD Combo
- ↳ Openbox SX4 HD
- ↳ Download Openbox SX4
- ↳ Openbox SX4 BASE HD
- ↳ Download Openbox SX4 Base
- ↳ DVB príjem v PC, notebooku a iných zariadeniach
- ↳ DVB príjem v PC
- ↳ Hardware pre DVB príjem v PC
- ↳ Software pre DVB príjem v PC
- ↳ Android zariadenia /nie štandardné sat. prijímače